In a photovoltaic power station, it is necessary to gather the power of a large number of components together and enter the inverter. It must rely on cables and connectors. The photovoltaic connector is one of the components, combiner boxes, controllers and inverters in the photovoltaic power generation system. The key parts that are connected to each other are not to be ignored!

           In the photovoltaic system, although the connector accounts for a small proportion, many links need to be used! Many construction workers do not know enough about the connector, which may cause equipment failure. In the entire photovoltaic system, the DC side voltage is usually as high as 600-1000V. Once the joints of the photovoltaic modules are loosened and the contact is poor, it is very easy to cause the phenomenon of DC arcing. DC arcing will cause the temperature of the contact part to rise sharply, and the continuous arc will produce a high temperature of 1000-3000 ℃, and accompanied by high temperature carbonization of the surrounding devices. The lighter case will fuse the insurance and cables, the more severe case will burn the equipment and cause a fire.

           Therefore, although the connector is small, it is related to everyone's safety. Therefore, it is very important to choose a high-quality photovoltaic connector!