1. The battery cable structure is a single-core cable made of multiple strands of flexible conductors, and the conductor is made of 99.99% pure oxygen copper. The copper wire has bright appearance, low resistivity, good conductivity and high safety.

      2. This product is suitable for the secondary side wiring and connecting welding clamps of the electric welding machine whose voltage to ground does not exceed 200 volts and the peak value of pulsating DC is 400 volts. It is a special type suitable for the connection of the secondary side of the electric welding machine and the welding clamp. cable. The AC rated voltage does not exceed 200V, and the pulsating DC peak value is 400V

      3. Particularly soft and good bending performance. The sheath material is a mixture of natural rubber or neoprene, which can be applied to different occasions.

      4. The neoprene hybrid jacket has the characteristics of heat resistance, oil resistance and non-combustibility. This product is suitable for the connection and connection of the secondary side of the welding machine whose voltage to the ground does not exceed 200V, 400V electric welding machine's pulsating DC peak value. The maximum operating temperature of the cable is 65°C.

      The above content is about the introduction of yh welding machine cable. This type of cable is also a special non-repairable type. Its various protection measures are stipulated by the manufacturer and cannot be adjusted at will. So pay more attention to its use and maintenance.