1. Leave 15% of the space, built-in cables, pipes, etc. can move freely, and the radius direction will not bring tension to the mop.

      2. Trailer cable with large wire diameter differences should be laid separately from the drag chain, and the weight distribution is even. If necessary, you can use partitions to separate them.

      3. When running at high speed or high frequency, try to separate the wires horizontally without overlapping. When there are many cables, pipes, and pipes, it is recommended to use partitions. In addition, if the movable part of the optical cable is fixed, the bending stress will not be dispersed and absorbed, and the stress will be concentrated in the fixed position. The fixed part of the cable should be set at both ends of the drag chain. Cable clamps can also be used to fix cables.

      Features of machine tool drag chain: It has high pressure and tensile load, good compression resistance, high elasticity and wear resistance, flame retardant, stable high and low temperature performance, and can be used outdoors. Resistance: oil, salt, acid and alkali resistance to a certain extent. Running speed and acceleration. long lasting. Application, suitable for reciprocating motion occasions, can play a role in traction and maintenance of built-in cables, oil pipes, air pipes, water pipes, etc.